Skip to main content

ChilloutVR

Project Babble has a mod-based integration for ChilloutVR.

Usage​

There are two parts to setting up the ChilloutVR mod: A receiving end and a sending end.

info

You will also need an avatar that is setup to be used with VRCFaceTracking/Project Babble.

Setting up the Receiver​

note

For both steps, you will need to have MelonLoader installed for ChilloutVR prior to proceeding, and VRCFaceTracking if using the VRCFaceTracking setup below.

MelonAssistant Method (recommend)
  1. Install MelonAssistant for ChilloutVR
  2. Install Kafeijao's OSC Mod using MelonAssistant
  3. Install UI Expansion Kit using MelonAssistant. This is required to change mod settings in game.
Direct Method
  1. Manually install Kafeijao's OSC Mod using MelonAssistant
  2. Manually install UI Expansion Kit using MelonAssistant. This is required to change mod settings in game.

Setting up the Sender​

VRCFaceTracking Setup
  1. In Kafeijao's OSC Mod settings, turn on "VRCFT Compatibility".

In doing this, any other OSC information being sent to CVR won't work. :::

Direct Method
  1. In settings for Babble, set the OSC address port from its default 8888 to 9000.
  2. Make sure to set the location prefix to /avatar/parameters.

Setting up an Avatar​

Avatar setup is largely identical to how one sets up avatars in VRChat (Setting up parameters in the animator, creating animator logic to drive visemes/blendshapes and other expressions, etc.). Please consult VRCFaceTracking's documentation on how to do this.